Weak WiFi signals and dead zones are the common problems that people face along with their home or office network system. If you are also one of them who is facing trouble with the router network and your router is not reaching to every room of your space then you need a WiFi extender to resolve the problem. Our Wi-Fi extender is an essential solution that can boost your current network signals and you need not to replace the existing system. Several range extender devices are available in the market out of which Netgear AC750 is one. People often think that the Netgear AC750 Setup is a difficult task and you need technical support for it but it is not true. 

You can easily complete the range Extender set up by yourself if you know the right process. Scroll down and read the step by step information if you are new to networking.

Installation of AC750

Netgear AC750 Setup process begins by the installation of the device hardware. For the hardware installation you have to follow the below given steps: 

• Look for a place closer to your router device to put the range Extender. 
• Once the placement is confirmed you can move further and power up the device by connecting it with the power outlet. 
• Turn on the power supply of the device and wait for it to start. 
• When the LED gets stable you have to proceed further and complete the configuration. 

Configuration of AC750

To initiate the Netgear AC750 Setup configuration you have to follow the below given steps: 

• First of all you have to choose a client device. You can use a computer, a laptop or a smartphone to initiate the setup. 
• After that you have to connect it with the range Extender network. For this connection you have two methods out of which you can follow anyone.
  • Wire method: This method of connection is suitable If you are using a computer or a laptop device to proceed with the setup. To connect the devices you have to use the ethernet cable. Inject the cable in the Ethernet port on both the devices.
  • Wireless method: This method of connection is suitable If you are using a laptop device or a smartphone device. If your computer supports wireless connection then you can use it. For the connection you have to use the standard network name and password of the wireless network of the extender. To connect you have to rush to the settings and then look for wireless settings. Search for the network name of the range Extender and enter its password. Click on connect and your device get connected 
• Once the connection is done you have to launch the web browser on your device. 
• In the URL bar of the browser you launched you have to specify the IP address or web address to reach the setup page.
• As you reach the page, enter the default login credentials.
• After that connect the router with the extender. 
• Use the router’s network name and password for the connection. 
• Moving ahead, you need to change the default network name and password of the extender network. 
• Don’t forget to update the security settings and save the changes you have made.

Boost Network 

Once the configuration of your range of extender devices is completed you have to boost the network. Relocate the device to a better location to boost the coverage. Keep the device within the range of the router device. Be sure that the new place you have choose to place your device is closer to the area where you was facing network issue. 

Conclusion 

At last I would like to conclude my words by saying that the Netgear AC750 Setup process is not so difficult. Anyone can complete the configuration of the device very easily if they know the right way. Set up of the device becomes successful if you know how to install it and do the configuration. Once you add the device to your networking system you will enjoy high speed internet across your space. You will no longer face weak signal issues or dead zone issues in a particular area of the house or office. This device is a perfect solution to eliminate network trouble like WiFi at zone.